PureFlow Airdog FPII-125, Руководство по установке

Страница: 13 / 24

13
PureFlow
®
Technologies, Inc.
AirDog
®
FPII-125 Universal Applications
When installing the AirDog
®
fuel system, it is recommended to bypass the factory filter canister
for optimum engine performance.
5-2. Remove the original factory fuel supply line at the fuel inlet port of the injection pump
(Figure 16).
Section 5 Fuel Lines
Figure 16
5-3. Assemble one end of the 1/2” fuel line (reference Section 5) using a #8 F JIC Swivel x
1/2” Pushlock Hose Barb (PN 4A-1-09-08-08-B) (Figure 17). Then connect the swivel end to the
fuel inlet of the injection pump. A # 8 M JIC x 3/8 M ORB Adapter (PN 4A-1-01-08-06-S) has
been supplied in this kit; however, you may need to adapt as necessary for your specific engine
application.
½” fuel line
Figure 17
5-4. Run the fuel line along the frame away from any hot or moving parts, such as exhaust
or driveshaft, to the “Engine” port in the AirDog
®
. Cut the fuel line to length and insert fuel line
end
FQC12S
(Figure 18) or
FQC1290
per step 5-1. Once the connector is installed, connect it to
the male J2044 fitting in the “Engine” port in the AirDog
®
. A “click” will be heard once properly
connected.
FQC12S
Figure 18
1/2” fuel line