Install the Fixture to Monorail Connector
A
FAST JACK
HOUSING
1
FAST JACK
HOUSING
CONNECTOR
FAST JACK
FIXTURE
CONNECTOR
2
2
MONORAIL
1:
Place the Fast Jack housing onto the Monorail and use
fingers to tighten the Fast Jack housing connector to the Fast
Jack housing.
Make sure that the Fast Jack housing
connector is not cross threaded.
2:
Use fingers to tighten the Fast Jack fixture connector into the
Fast Jack housing connector.
B
FAST JACK
HOUSING
CONNECTOR
FAST JACK
HOUSING
1
FAST JACK
FIXTURE
CONNECTOR
2
2
MONORAIL 2
CIRCUIT
Installation Instructions for
Piston
SAVE THESE INSTRUCTIONS!
- This instruction shows a typical installation.
- This product is intended to be used with PureEdge Lighting
Monorail and Fast Jack systems only.
IMPORTANT INFORMATION
1718 W. Fullerton Chicago, IL 60614
Ph: 773.770.1195 ● Fax: 773.935.5613
www.PureEdgeLighting.com ● [email protected]
© 2016 PureEdge Lighting. All Rights Reserved.
Doc # 904-FJ-PST_02
FJ-PST-__
Install the Fixture to Monorail 2 Circuit Connector
1:
Place the Fast Jack housing onto the Monorail 2 Circuit and
use finger to tighten the Fast Jack housing connector to the
Fast Jack housing.
Make sure that the Fast Jack
housing connector is not cross threaded.
2:
Use fingers to tighten the Fast Jack fixture connector into
the Fast Jack housing connector.
1
