5
#6-32
SCREW
CORD GRIP
ASSEMBLY
O
20:
Mount the cord grip assembly to the 2" plaster ring using
two #6-32 screws.
P
21:
Place the 2" canopy over the cord grip against the ceiling.
Secure it in place by tightening the knurled nut to the cord
grip.
Make sure the knurled cap is not cross
threaded.
20
20
NOTE:
Omit steps 20 and 21 if using 4" Round or Square
canopy. Adjust fixture height by following step 23.
KNURLED
NUT
2" CANOPY
21
CORD GRIP
ASSEMBLY
Q
#4-40
SCREW
CORD
GRIP
CABLE
22
23
22:
Align the 4" canopy with the crossbar and secure it using
the two #4-40 screws using a 1/16" Allen wrench.
23:
If necessary for fine adjustment of the fixture height push
the cord grip tab to slide the fixture up and down until
desired height is achieved. Release the cord grip tab to
lock the coaxial cable in place.
