1
1718 W. Fullerton Chicago, IL 60614
Ph: 773.770.1195 ● Fax: 773.935.5613
www.PureEdgeLighting.com ● [email protected]
© 2016 PureEdge Lighting. All Rights Reserved.
Doc # 904-NSM-XP_02
Installation Instructions for
Nova Suspension Downlight Modular
X-Shaped Power Connector
NSM-XP_-_
Section One: Connecting Channel Sections
SAVE THESE INSTRUCTIONS!
- This product is ETL listed.
- This product suspends only from the ceiling.
- The NSM-XP, XP1, XPS, XP90, XPT connectors physically
connect four NS_M-_ Nova Suspension Downlight Modular
channels together and conduct the power from a remote
power supply powering up to four channels.
IMPORTANT INFORMATION
Indicates 24VDC
Power Flow
A
1
1:
The X-Shaped Power Connectors physically connect four Nova Suspension Modular channels together and conduct power
from a remote power supply powering all channels (XP), in a T-Shape (XPT), straight through two channels (XPS), two
channels in a 90 degree turn (XP90), or one channel (XP1).
NOTE:
Ensure that additional channel sections are properly
supported using Nova Suspension Modular supports.
2:
Align the channel assembly with one end of the X-Shaped
Power Connector and slide into place.
3:
For ends conducting power, push the channel assembly onto
the male pins of the X-Shaped Power Connector until they
are properly mated.
X-SHAPED
POWER
CONNECTOR
B
2
CHANNEL
PINS
3
XP
XPT
XPS
XP90
XP1
