
7
Installation tips
1) Do not block or restrict
the airflow around the
unit. Make sure the air
inlet exhaust grilles are not
obstructed. Allow 20 cm of
clearance around the unit.
4) Before the initial operation, please check,
if the water level switch, located within the
water bucket area, is in the right position.
EN
2) Ensure the air filter is clean
3)
4) The HEPA-CARBON filter is compliant with
the international standards so that it
retains 99.97% of all particles with size
from 0.1 μm or larger, stops mold spores,
dust, dead cells from pets, mites etc..
When using the HEPA-CARBON filter, you
have to set the fan speed to HIGH. Also
note that the efficiency of the dehumidifier
will be reduced by 30%.