Puredry PDD 10L Famous, Руководство пользователя

Страница: 12 / 42

12
After adjustment (or inaction for 5 seconds, the indicator stays on if the lighting is
between L0-L5 ( and disappears when the adjustment is H ), and the digits show's
room's temperature.
→
Before adjustment After adjustment
In SL EEP mode function only the L0, L1 , L2 are allowed .
In LOW or HIGH operation , we can adust between
L 0- H .
Temperature indicator and width operation
The product can operate between 1~40°C and the digits shows the room temperature .
When the temperature is above 43°C the indicator "HI" will apear and if it is below 1°C the
indicator "Lo" will apear , the product will stop operating and will start again when the
temperature is between 40°C and 3°C. During the HI and Lo only the Power button can be
activated.
SWING
You can choose the slop of the louvre between 0 and 150 degree , by pressing the
Swing (50°~150°, 0°~60°, 0°~150°).
Upward
→
F rontward
→
Wide
→
Stop
50°~150° 0°~60° 0°~150° any angle
By pressing the button again, the lourve
will stop in the wanted positioin.
IONIZER
Press the buttons and simultaneously to activate or unactivate the Ioniser and the
IONS indicator will apear or disapear. By activating the ionizer, negative ions are released
to purify the air and remove unpleasant and unhealthy particles.
ALARM
If the unit malfunctions, an alarm system will activate and the unit will automatically shut
down.
Internal Over Heating Protections : During operation, malfunctions may occur if the air
intake or exhaust are obstructed or blocked by objects . This can cause high internal
temperatures and the appliance will automatically shut down. In this situation the
dehumidifier will set off automatically.
Tipping Protection : The unit has a heater inside, to avoid overheating, the unit is
equipped with a tipping switch that automatically shuts down the device in the event the
unit tips over.
IONS on
→
IONS off
ION S
EN