www.PyleUSA.com
16
Charging Instructions
1. The battery should be repaired and replaced by the aftersales department.
2. For the very first operation,please let the robot run out of power.
3. When the robot is charged, the Control button will flash a green lamp in a
circular manner.
4. If the robot is out of service for a long time, please turn off the power switch.
5. Please charge the robot as soon as possible after the battery is used up.
6. The product can only use the power adapter and charger provided by the
factory.
7. Please charge the robot for 12 hours for the first time of operation.
When the charging is done, the Control button light turns off.
Preset Cleaning
You can set the robot by pressing the
Time Settings
button on the remote control
to the current U.S. time, and press OK button.
•
Once the power switch is turned off, all pre-settings will be cancelled.
•
Once the pre-setting is in effect, the robot will start working at the appointed
time every day.
