OPERATING INSTRUCTIONS
Press this button to switch the unit into continuous mode.
Use this button if the unit will not be in use for an extended period of time. Pressing the drain
pump button will remove
water from the pump reservoir, so the unit can be safely moved or stored.
THIS FUNCTION IS ONLY AVAIL .ABLE ON THE Sentinel HDi90 model.
CONTINUOUS
DRAIN PUMP
c
P
Cont.
will appear on the display to indicate continuous mode.
Press the power key to turn the machine on.
START THE MACHINE
Use the up and down arrow keys to adjust your desired setpoint (typically 50-55%).
ADJUST THE SETTINGS
Press the power key again and the machine will stop. Note the fan will continue to operate
for 1 minute after the unit has turned off. NOTE: Do not disconnect the power cord to force
unit to stop. Always use the power button.
STOP THE MACHINE
During normal operation, the PureAiro DSC 55S will automatically drain by the force of
gravity.If you want to move or store your machine, wait at least 10 minutes to allow the
machine to completely defrost, then lean unit gently towards drain to ensure that it is
completely drained.
WATER DRAINAGE
PUREAIRO DSC 55S DIAGRAM
REMOTE CONTROL INSTRUCTIONS
When the compressor light glows red, it indicates the compressor has been initiated but is
currenty warming up.
Once the compressor light switches to green, it indicates the compressor is in working
status.
Sentinel Dehumidifiers can be controlled using an optional remote accessory.The Sentinel
Remote Control connects to your Sentinel Series Dehumidifier via a 25' CAT 5 cable. The
remote control contains an integrated sensor which gives you multiple options for remotely
controlling your unit, in addition to monitoring the conditions surrounding the dehumidifer.
One application for the remote control is to install the dehumidifier in one room with the
conditioned air ducted into a second room that contains the remote. For example, the
dehumidifier could be installed in a laundry room and ducted into a living room. The remote
would then be mounted in the living room so the remote sensor can control the humidity and
provide easy controls for the user.
COMPRESSOR LIGHT
Another useful application for the remote control is if the dehumidifier is in area that's
difficult to access on a regular basis. For instance, if your dehumidifier is installed in your
crawl space, the remote could be mounted in your living space or garage. This provides you
with an easy way to monitor the dehumidifier.
Press the on/off button and the machine will
start running (one beep). Press the button
again to the turn the machine off.
Use the Up and Down arrow buttons to adjust
the humidity level.
ON/OFF (POWER)BUTTON
UP BUTTON▲ / DOWN BUTTON
Use the Mode button to switch between
dehumidification and a ducted application.
MODE
The
symbol on the display board indicates
the sensor on the remote control is being
utilized.
The
symbol on the display board indicates the sensor on the dehumidifier is being utilized.
TEMPERATURE
Press the temperature button to display the current temperature on the screen. Press the
button again to turn off the display.
PureAiro
DSC 55S
4
1
2
3
M
4
T
5
6
NOTE: Symbols indicated above will only appear when the dehumidifier is powered on.
1
2
3
4
DRAIN PUMP
MODE
LCD MONITOR
CONTINUOUS
TEMPERATURE
DOWN BUTTON
UP BUTTON
ON/OFF
06
07
Front View
POWER CORD
CONTROL PANEL
REMOTE CONTROL
A5/A6 AUX.TERMINAL
FOR OPTIONAL COND.PUMP
DRAIN CONNECT
UNIT COVER
HABDLE
