4
Getting Started
1 .
Plug the
Power Adapter
into a wall outlet and then plug the other end
into
Power Port
of your unit.
2.
Press the
Power Button
to once turn your unit
ON
(begins in
Ionization
Mode
). Press it again to change to
Purification Mode
. Press it one more
time to turn the unit
OFF
.
3 .
Press the
Away Mode Button
on the top of your unit to activate the
Away
Mode (Red Light).
NOTE:
Your unit will revert back to its previous mode after the 30 minute cleaning cycle has
ended. Away Mode can also be activated while the unit is OFF. Once complete, your
unit will shut OFF
.
NOTE:
Once your unit is turned OFF, it will continue to operate for 30 seconds to clear any
ozone remaining inside.
Power Port
Power Button
Filter Cover
Away Mode Button
Light Button
Filter Cover Screw
Diagrams
BOTTOM
TOP
Before using your pureAir 500 you will need to find the area (or square footage) of
the environment. To do this accurately, take into account all connected rooms with
open doorways
(the purification does not flow through closed doors)
. The pureAir 500 can
purify up to 850 square feet of space
(based upon an open floor plan with 8.5’ ceilings)
.
