Viewing extra information
The DRX-601EX has two information modes which enable you to view extra information about the current multiplex.
Press the
Info
button on the front panel of your DRX-601EX and repeat or hold down to cycle through the two
different information modes. Press the
Display
button to return to normal display mode.
Changing the display brightness
The DRX-601EX has four levels of brightness which you can alter to suit your room’s light levels.
Press the
Brightness
button on the front panel of your DRX-601EX and repeat or hold down to cycle through the four
levels of brightness available.
Mode
Displays the mode of the current service, Stereo (ST) or
Mono (MN) and the data rate at which the audio signal is being transmitted. This rate is set by
the broadcaster to suit the type and quality of material being transmitted.
Signal strength
Displays the strength of the signal for the current multiplex. Maximum strength is indicated by
16 bars across the display.
Note
If sound quality is poor, try repositioning your aerial whilst
observing the signal strength indicator, you may be able to increase reception quality.
Adjusting the volume and tone
Once you have tuned your digital radio as explained above you can adjust the volume and tone to your preferred
levels. You use the
Volume
and
Tone
controls to adjust these levels.
1.
Adjust the volume level using the volume control.
2.
Adjust the tone level from low (more bass) to high (more treble).
9
Содержание DRX-601EX
Страница 1: ......
