PureLink by Dtrovision
22
*999CI01O01-04!
Connect Input 1 to Output 1, 2, 3, and 4
*999PTP!
Connect Input 1 to Output 1, Input 2 to Output 2, Input 3 to Output 3 and Input 4 to
Output 4
2.7 Disconnecting Switches
The characters and numbers in a Disconnect command tell the system which input or output to
disconnect. The “D” key initiates a Disconnect command for routing a switch. The characters and
numbers that follow the “D” command tell the system that inputs and outputs to disconnect. The last
character “!” is found at the end of the Command code, which tells the system to execute the
command.
For example, the command code
*999DI01O00!
It can be interpreted as follows: (*) Starting the command code (999) Router ID is 999 (D) Disconnect on (I01)
Input 01 to (O00) Output 00 (!) take the command. For a complete list of command characters and their
functions, see the command list below
1. Enter the Disconnect command
below. Replace the “#”s with the input and output number(s).
*999DI#O#!
Examples (Disconnect) :
Command Codes
Action
*999DI01O00!
Disconnect Input 1 to no Output (00)
*999DI00O03,04!
Disconnects Outputs 3, and 4
*999DI00O03-04!
Disconnects output 3, and 4
*999DALLIO!
Disconnects all inputs and outputs
EDID Setting
*999EDIDI01E3!
: write E3 EDID (1080p, HD audio) to input # 1
List of EDID
E1
1080p, 2 ch audio
E2
1080p, dolby/dts 5.1
E3
1080p, HD audio
E4
1080i, 2 ch audio
E5
1080i, dolby/dts 5.1
E6
1080i, HD audio
E7
3D, 1080p, 2 ch audio
E8
3D, 1080p, dolby/dts 5.1
E9
3D, 1080p, HD audio
E10 4K@30Hz, 2 ch audio
E11 4K@30Hz, dolby/dts 5.1
E12 4K@30Hz, HD audio
E13 4K@60Hz, 2 ch audio
E14 4K@60Hz, dolby/dts 5.1
E15 4K@60Hz, HD audio
E16
Emulate from HDMI output #1
E17
Emulate from HDMI output #2
E18
Emulate from HDMI output #3
