background image

12 

 

FREQUENTLY ASKED QUESTIONS 

 

 

CARE AND MAINTENANCE 

 
Your slide is designed to be very low maintenance. 

 

If any part of the slide requires cleaning, simply wipe with a damp cloth.   

 

Regularly check to see if slide chute, steel tubes, steps, ground anchors and other parts 
are tightened and completely secure. Replace worn & damaged parts when necessary. 

 

If the paint is chipped, we recommend you lightly rub the damaged area and cover using a non-
toxic enamel paint. 

 

 

IMPORTANT:  While  no  regular  maintenance  is  required,  you  must  inspect  the  slide  before  each 
use and replace any worn, defective, or missing parts.  The following conditions could represent 
potential hazards: Missing, improperly positioned, or insecurely attached ground anchors or slide 
chute, Missing, improperly secured or damaged ladder steps, A bent or broken frame, and/or Bent 
or  buckled  Stabilizer  or  Tie  Bars.    Cease  using  slide  immediately  and  secure  it  against 
unauthorized use if any of these conditions are present. 

 

  

 

Question:  “How should I clean my slide?” 
Answer:  YOU SHOULD CLEAN THE SLIDE WITH A SOLUTION OF WARM WATER AND NON-
CORROSIVE/ABRASIVE SOAP. DAMPEN A RAG WITH THIS SOLUTION AND WIPE COMPLETELY DRY BEFORE 
USING.   

 

Question:  “Is there any maintenance I need to do for my slide?” 
Answer:  YOU SHOULD ALWAYS DOUBLE CHECK TO MAKE SURE ALL YOUR BOLTS ARE TIGHT AND SECURE, 
AND THAT THE GROUND ANCHORS ARE PRESENT AND SECURELY IN PLACE BEFORE USE.  

 

Question:  “A step seems loose, what should I do?” 
Answer:  MAKE SURE THE BOLTS UNDER THE PLASTIC STEPS ARE SECURE.  
 

Question:  

“Something was missing from the packaging,” “I need to purchase a replacement part” or “I 

discovered a damaged piece. What should I do?”

 

 
Answer:  

CONTACT PURE FITNESS CUSTOMER SERVICE AT: 

[email protected]

 or by calling 866-

498-5269. YOU MUST HAVE YOUR PROOF OF PURCHASE AND/OR ORDER CONFIRMATION AVAILABLE TO BE 
CONSIDERED FOR WARRANTY REPLACEMENT. YOU MUST REPORT MISSING PIECES WITHIN 30 DAYS FROM 
DATE OF PURCHASE. PLEASE BE AWARE THAT UNDER OUR LIMITED WARRANTY, FOR SOME PARTS WE 
REQUIRE A PICTURE OF THE DAMAGED ITEM AND/OR RETURN OF THE ITEM TO OUR QUALITY CONTROL 
OFFICE FOR REVIEW.  

Содержание Wavy Slide 9302WS













Отзывы: