9
MODEL# 9
203
TL
ASSEMBLY INSTRUCTIONS
STEP 4
:
Locate:
x2 Step (Part 3)
Slide the Steps (Part 3) from the top of
the Poles until it reaches and aligns to
the middle openings and upper
openings.
NOTE:
Make sure that the top part of the Step is
facing upwards. It will be made up of a
geometric pattern and be completely flat
.
STEP 5
:
Locate:
x2
4
0mm Screw (Part 6)
x2 Nut (Part 7)
A.
Slide x1 Nut (Part 6) on the back
of the
Step
,
it will fit perfectly.
B.
Align all openings from the Step & Pole.
Insert x1
4
0mm Screw (Part 6) and
tighten with a Phillips Screwdriver. Hold
on to the Screw Nut on the opposite side
to avoid that it falls as you tighten the
Screw. Repeat this on both steps.