ASSEMBLY INSTRUCTIONS
STEP 1
:
A. Lay Left Ladder Riser (1L) and Right
Ladder Riser (1R) on a flat surface as
shown to the left.
B. Place 2 steps (2) on the ground so that
the thicker edge of the step is facing
away from you and the stepping surface
slopes down towards you as pictured.
Flip steps over and slide them onto the
Ladder Risers (1L, 1R)
C. Insert the Foam Cushions (4) onto the
ends of the Ladder Risers (1L, 1R)
D. Turn the Ladder Risers (1R, 1L) inwards
and insert the smaller end into the larger.
NOTE:
Lift the Steps up towards the hook end of
the Ladder Risers to create enough room
for the Riser ends to join together.
NOTE:
DO NOT ATTACH THE STEP LOCK
HOUSINGS YET.
When placing the Step Lock Housings onto
the ladder in the next step, make sure that
the side shown is facing out from the sides
of the ladder. There are tabs in the holes
on the Steps which need to slide into the
locking mechanism of the housing.
This side will be facing out to the left on
the Left Riser, and to the right on the Right
Riser. As such, you will have the open seam
facing up on one Step Lock Housing and
the open seam facing down on the other.
1
Youtube Assembly Video:
https://youtu.be/eCJdnbKVJY
MODEL#
9200TL
7