METER INSTRUCTIONS
FUNCTION BUTTONS:
MODE:
This button cycles through the available Displays and turns the unit ON. Press and hold this
button for 3-4 seconds to reset the data values of the monitor.
NOTE: When the batteries are replaced, ALL values will reset to ZERO automati-
cally.
FUNCTIONS & OPERATIONS
1.Battery Installation:
This meter takes 2 x AA 1.5V batteries. Install batteries under the cover in the rear of the meter.
Note: Replacing the batteries will reset ALL values on the meter to ZERO.
2.Auto On/Off:
The system turns on when the MODE key is pressed or when you begin to pedal the bike.
The system turns off automatically approximately 4 minutes after you have stopped using the unit.
Display Specifications
1.
SPD-------------------------0~99.9 (Speed travelled)
2.
CAL---------------- 0~99.99 (Calories burned)
3.
DST---------------- 0~99.99 (Distance traveled)
4.
SCAN------------------------3 SEC (Displays data (rotating) from all modes)
5.
TMR----------------------- 0:00~99:59 (Duration of exercise)
6.
PUL-------------------- Heart rate (BPM)
Note:
1.If the computer displays data abnormally, please remove the batteries and try again.
2.Battery Spec: 1.5V AA (2PCS).
3.The batteries must be removed from the unit before it is discarded and disposed of safely in
accordance with local ordinances.
