5
MODEL# 9038MT
ASSEMBLY INSTRUCTIONS
T-Section Locations
STEP 1
:
NOTE
:
The Frame Pad (Part 9) may be already
attached to the Frame, remove it and place
it aside until Step 3
The Frame (Part 1), Jumping Mat (Part 2),
Springs (Part 3), & W-Hooks (Part 4) should
be assembled in one piece.
Place assembled Frame on an even, clean,
& flat surface to install. Make sure that
there are no obstructions in your way when
building the Mini Trampoline.
NOTE
:
Make sure that the spring ends are facing
up, and the logo printed on the Jumping
Mat is facing the floor.
1
2
3
4
5
6
Assembled Frame
