Step 3: Attach Handrail Supports to Trampoline
Flip the trampoline over. Locate the holes in the Frame Padding and align the Handrail Supports to
these holes. YOU MUST ATTACH THE HANDRAIL SUPPORTS ALIGNED WITH THESE HOLES.
Locate the remaining 2x Legs and place them through Handrail Supports A (7) and B (8). Secure the
Handrail Supports onto the remaining 2x legs using the 2x Screws (11), Nuts (12), Safety Cap Nuts
(13) and Washers (X1), as shown below. Secure the legs to the frame as described in Step 2.
Step 4:
Attach Top Handrail to Handrail Supports.
Insert both ends of the Top Handrail sections (9,10) into the Right and Left Handrail Supports. Once
secure, join the center of the Handrail by pushing the pin on the “Male” Top Handrail section, and
allowing the two pieces to slide together. Make sure you hear a “clicking” sound and that the joined
sections are secure before continuing.
