6
Changing the display mode
The DRX-701ES has seven display modes which enable you to view different elements of the broadcast data on the
bottom line of the display. Press the
Display
button and repeat to cycle through the seven different display modes.
Scrolling text
The default mode, displays scrolling text accompanying the audio, where available.
Program type
A description of the type of content being broadcast by the service.
Multiplex name
The name of the multiplex in which the current station is found, see
Guide to Digital Radio
, page 9
for more information on multiplexes.
Date and time
Displays the date and time obtained from the current multiplex.
Channel
Displays the channel identifier and frequency for the station to which you are tuned, see
Guide to
Digital Radio
, page 9 for more information.
Mode
Displays the mode of the current station, Stereo or Mono and the data rate at which the audio
signal is being transmitted. This rate is set by the broadcaster to suit the type and quality of
material being transmitted.
Signal quality
Displays the signal quality for the signal to which you are tuned. As a guide, values from 85 to
100 indicate good reception, 70 to 84 borderline reception and 0 to 69 poor reception. You can
attempt to improve signal quality by adjusting your aerial position using the
Tuning aid
option,
see page 7.
Selecting a station
Once you have tuned your DRX-701ES you can use the large turn-and-push tuning knob to select digital radio stations.
1.
The top line of the display shows the name of the currently selected station. Rotate the tuning knob to scroll
through the names of other stored stations on the bottom line of the display. Stop when you find the station you
want.
2.
Push and release the tuning knob to listen to the station you have selected. The display may show ‘Now tuning...’
briefly as it finds the new station.
If the station you select is in stereo, the
Stereo
LED will light up.
If a station has one or more secondary services available the display will show ‘>>’ next to the station name while
you are scrolling the station list and they will appear after the primary service as you turn the tuning knob. The
Secondary
LED will light up when you select the station.
A secondary service will display ‘<<‘ before the station name while you are scrolling the station list indicating that it
belongs to the primary service before it in the list. The
Secondary
LED will light up when you select the station. See
page 9 for information on primary and secondary services.
If the station has ‘?’ before its name the station is currently inactive or invalid. If you select a station which has this
symbol the DRX-701ES tries to tune to that station. If still unavailable ‘Station not available’ or ‘Station off-air’ will be
displayed and your DRX-701ES will attempt to tune to an alternative station. A flashing cursor will indicate that this
is underway. If you want to try to manually tune to this station you have five seconds after the above messages in
which to push the tuning knob and see the tuning aid, see
Tuning aid
, page 7.
Changing the display brightness
The DRX-701ES has four levels of brightness which you can alter to suit the light level in your room. The lowest level
turns off the LCD backlight and the
Stereo
,
Secondary
and
Remote
LEDs.
Press the
Brightness
button and repeat or hold to cycle through the four brightness levels.
Содержание DRX-701ES
Страница 1: ......
