1. Twist and remove the cap and the plug from
the base of the bag.
2. Pour water into the base until the base of the
bag is completely full.
3. Replace the plug, and screw the cap tightly
back on to the base of the bag.
4.
Securely close the valve.
5.
Locate the air valve on the side of the bag
and
open.
6.
Inflate the bag with standard Foot Pump
(NOT
included
)
. Fill until bag is upright and
most of
the
wrinkles have straightened out.
7.
Close air valve and push gently into the
body.
NOTE:
Be careful not to over-inflate the bag. You
should be able to depress your finger in to a depth
of about 2” when fully inflated.
INSTRUCTIONS:
ASSEMBLY INSTRUCTIONS
4
MODEL#
891
6TG
Youtube Assembly Video:
https://youtu.be/b6oAc2ogdPM
