www.pure-acoustics.com
Troubleshooting
Issue
Possible Causes
Solution
No power
The unit is not connected to
the power supply or the
power cable is not properly
connected to the outlet.
Make sure the unit is connected to the
power supply. Try connecting the cable to
a different outlet.
No sound or distorted sound 1.
The audio cables aren’t
properly connected.
2.The volume is set to the
minimum level.
3.The sound is switched off
1.Confirm that the audio cables are
connected properly in the correct inputs.
2.Turn up the Volume
3.Press MUTE on the remote control to
switch on the sound.
4.Press Play/Pause
The buttons on the unit are
not working.
The unit is being interfered
with static electricity etc.
Switch off and unplug the unit.
Then connect the plug to the power
supply and switch on again.
The IR remote control is not
functioning properly.
1.Check to make sure that
there are batteries inside
and that they installed
properly.
2.The batteries installed are
depleted and in need of
replacement.
3.The remote sensor is
obstructed or the remote
control is not pointed to the
remote sensor
4.The remote control is out
of its operating range.
5.The unit is powered off
1.Install 2 AAA/1.5V batteries in it.
2.Replace the batteries with new ones.
3.Remove any obstructions and make
sure that the remote control is pointed at
the remote control sensor.
4.Make sure the remote control is within
the operating range
5.Switch off the unit and disconnect it
from the AC outlet. Then power the unit
on again.
Technical Specifications:
Power Supply
DC 12V / 1A
Power consumption
75W
Working environment(Temperature)
-10~+35C
Relative Humidity
5%~90%
Power output(Max)
75W*2 + 75W SUBWOOFER
Frequency response
+/- 3dB (40Hz ~ 20KHz)
