INTRODUCTION
Thank you for purchasing Pure Acoustics’ products, and welcome to the Pure Acoustics family of satisfied customers!
Pure Acoustics was established to fulfill the need for high quality speakers of exceptional design at an affordable price. After years
of research and development, and by manufacturing all parts ourselves -- from the voice-coil to the uniquely-designed crossover --
Pure Acoustics is able to offer you speakers of superior value.
Each speaker component has been designed and engineered with first-rate materials to produce exceptional sound. Our speakers
offer the best of it all – high-quality sound, hand-made solid construction, and a remarkably stylish appearance.
We welcome you to witness the results. Our team’s dedication to quality, reliability and attractive design has created some of the
best-value speakers you can find today.
Reading this manual fully will help you to set up your speaker properly and reward you with a fine listening experience. Pure
Acoustics distribution centers in Europe, Asia, Australia and the Americas will be happy to assist you with any questions you may
have. Please look for the distributor nearest you on our web site, www.pure-acoustics.com.
CONNECTIONS
Make sure all equipment is turned off. When connecting the speakers, be sure to retain the correct polarity. Most speaker cables
will have (+) red sign for positive and (-) black sign for negative.
Connect the speaker cable to the positive (+) front-left speaker terminal on the amplifier and to the positive (+) terminal on the
front-left speaker. Connect the speaker cable to the negative (-) front-left speaker terminal on the amplifier and to the negative (-)
terminal on the front left speaker. Repeat the same step for the right – side front speaker. In the case that your speakers have two
sets of terminals on the back, either set of input terminals can be used as long as the shorting straps are in place. If you want to
bi-wire your speakers and if your amplifier is equipped with bi-wire output connection, remove the shorting straps and connect each
terminal to the associated terminal in your amplifier. The upper input terminals on the back of the speaker are connected to the high
frequencies and the lower input terminals are connected to the low frequencies.
Connect the speaker cable to the positive (+) center speaker terminal on the amplifier and to the positive (+) terminal on the center
speaker. Connect the speaker cable to the negative (-) center speaker terminal on the amp and to the negative (-) terminal on the
center speaker.
Connect the speaker cable to the positive (+) rear left speaker terminal on the amplifier and to the positive (+) terminal on the rear-left
speaker. Connect the speaker cable to the negative (-) rear-left speaker terminal on the amplifier and to the negative (-) terminal on
the rear-left speaker. Repeat the same step for the right-side rear speaker.
POSITION
THE FRONT SPEAKERS should be placed on each side of your TV or in front of your favorite listening position. As a general
guideline, the space from the speakers to the listening position should be 1.5 times the distance between the speakers. For
example, if your listening position is 9ft (2.7m) away from the speakers, the distance between the speakers should be 6ft (1.8m)
THE CENTER CHANNEL SPEAKER should be on top of or just above your TV.
THE REAR (SURROUND) SPEAKERS should be positioned either to the side of, or behind, your listening position. Typical
placement is on the side walls, slightly above ear level, about two-thirds of the way back from the front of the room. This allows the
surround speakers to aim directly at the listener, placing you in the middle of a five-speaker sound field.
