www.pure-acoustics.com
Starting Out
Using the included AC power cable connect your speaker to an outlet to power it on and/or to
charge the battery. Whenever the AC power cable is connected the charge LED indicator light (#11
in the diagram) will illuminate indicating your speaker is being charged.
On primary use the speaker should be charged for 3-5 hours or until the battery indicator light (#12
in the diagram) illuminates green.
Once the battery is fully charged the external adapter may be disconnected and stored for safe
keeping and future use.
To power on the speaker flip the power switch to the “ON” position on the main panel (#1 in the
diagram).
Selecting a Music Source
Push the “Mode” button (#2 in the diagram) to select between sources Bluetooth, AUX and AM/FM
Radio. In Bluetooth the source indicator light (#3 in the diagram) will illuminate a solid blue, in AUX
mode the indicator light will illuminate red and in AM/FM mode the indicator light will go out and
the digital display will indicate the current station. Use the AM/FM switch (#7 in the diagram) to
select between AM and FM frequencies.
Setting up a Bluetooth Connection
Push the mode button on the front panel until the source indicator light illuminates blue indicating
the speaker is in pairing mode and ready to connect. Use the native controls on your Bluetooth
device and power on Bluetooth then select scan to discover nearby devices. Select EDGEWATER
from the list of discovered devices in order to pair and connect. Music played on your Bluetooth
devices will now be heard through the EDGEWATER. To pair a secondary device push the disconnect
button (#13 in the diagram) to quickly enter pairing mode again.
Auxiliary Connection
Push the mode button on the front panel until the source indicator light illuminates green indicating
the speaker is in AUX mode.
Using the included auxiliary cable connect one end into the AUX port (#9 in the diagram) and insert
the other end of the cable into the headphone jack on your music player. Music played on your
music player will now be heard through the EDGEWATER.
Digital Tuner (AM/FM RADIO)
Push the mode button on the front panel until the source indicator light goes off and the digital
screen illuminated indicating the speaker is in AM/FM mode.
Use the AM/FM switch to select between AM and FM frequencies.
Use the “Tune” arrows to scan through the different AM/FM stations.
Use the “Preset” digits 1-6 (#5 in the diagram) to select a preset station.
Press and hold the digit 1-6 to store a specific station as a preset station.
In AM/FM mode the digital screen will indicate the current station.
