15
Click “Enable DHCP” so that it is not checked, then enter the desired address in the “IP Address” field. Click “Save Config”
to save the settings. The device will reboot and then you must point your browser to the newly assigned address.
The device’s address is displayed on the OnGuard’s network menu as shown below and may be accessed by scrolling
through the menus using the devices “Menu” key on the front panel.
Direct Connection (no Network)
Finally, the device may be accessed directly from a PC/MAC without a proper network. This is accomplished by setting
your computer’s network adapter to a fixed address on the 192.168.2.x network; for example, 192.168.2.99.
From the Start menu, click Control Panel.
