Pura CB106, Инструкция по установке и эксплуатации

Страница: 2 / 4

2
INSTALLATION
1. Identify all your core components and check the waste is complete.
2. Fit the brass waste body (12) through the bath and screw into the plastic
waste body (15), using a suitable leak sealant between the brass waste
fitting and your bath and tighten securely. For a very thin bath the option
al washer (13) may be fitted between the brass waste body fitting (12)
and the bath.
3. Attach the overflow fitting (5) to the underside of the over flow hole of
your bath and secure by using the retaining bar. The overflow cover can
now be attached to the retaining bar with a firm push. washer (4) is
placed between he bath and the overflow fitting, using silicone sealant
where necessary.
4. Connect the overflow tube to both the over flow elbow and plastic waste
body
NB - do not over tighten the overflow cover retaining screw (2)
(2)
4 .Check all joints and connections for leaks.
5. See over the page for aftercare instructions.
COMPONENTS
1 WS191 OVERFLOW COVER FOR CB106
2 WS192 OVERFLOW COVER RETAINING SCREW FOR CB106
3 WS193 RETAINING BAR FOR CB106 OVERFLOW COVER
4 WS194 BLACK OVERFLOW SEALING WASHER FOR CB106
5 WS195 CB106 OVERFLOW FITTING
6 WS196 OVERFLOW TUBE FOR CB106
7 WS197 OVERFLOW TUBE FIXING NUT FOR CB106
8 WS198 OVERLOW PIPE SEALING WASHER FOR CB106
9 WS199 DOME PLUG FOR CB106
10 WS200 PLUG SEALING WASHER FOR CB106
11 WS100 CLICKER MECHANISM
12 WS201 CHROME WASTE BODY FOR CB106
13 WS202 BATH SEALING WASHER FOR CB106
14 WS203 WASTE BODY WASHER FOR CB106
15 WS204 ABS WASTE BODY FOR CB106
To order spare part please call our technical helpline on 01892611240 selecting option 2