8
CLEANING & MAINTENANCE
The benefits conferred by this warranty are in addition to all implied warranties, other rights and
remedies in respect of the product which the consumer has under the Trade Practices Act and
similar State and Territory Laws. The original purchaser of this product is provided with the follow
warranty, subject to the following conditions. This product is warranted for a period of 2 years from
faulty, the product will need to be returned to the retailer where it was purchased to be replaced
free of charge or a refund issued. In order to obtain an exchange or a refund, proof of purchase
must be presented to the retailer.
WARRANTY
EN
DISCARDING WORN HOUSEHOLD DEVICES
The European directive 2012/19/EC pertaining to electrical and electronic waste prohibits such household
goods from being discarded with local refuse services. Worn devices must be collected separately to optimize
the recovery and recycling rates of the components therein to reduce detrimental effects on the environment
and on human health.
- Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning.
- Do not use bleach or other abrasive substance or solvents to clean your foot warmer as it can be
damaging to the finish.
- The electric foot warmer should be kept clean, because it may not be washed or dry-cleaned.
- Before cleaning the foot warmer, always disconnect the plug from the mains and allow it to cool
down.
- The foot warmer can be cleaned with a dry, soft brush.
- Small marks can be removed with a cloth or a slightly damp sponge, using a mild liquid cleaner.
- The foot warmer may not become wet, if it becomes damp it must be air dried.
- Store the foot warmer in a dry place and do not place any objects on top of it.
CLEANING THE FLEECE LINER
- Before cleaning the foot warmer, the liner must be taken out.
- The liner can be cleaned with a damp cloth or according to the care instructions on the labels.
- Use solvent-free cleaners only.
- Only use the foot warmer again, once the liner is completely dry.
OPERATION
- Plug the unit into the wall socket and switch on the wall socket.
- Switch on the unit by using the switch on the remote
- To switch on the massage function, move the MASSAGE button to “HI” or “LO”, as indicated on the
remote.
- To switch off the massage function, move the MASSAGE button to the “OFF” position.
- To switch on the heat function, move the HEAT button to “HI or LO”.
- To switch off the heat function, move the HEAT button to the “OFF” position.
