Operation
The appliance is intended only for domestic use, not for professional use.
Operation
4. Handle
3. Lid release button
6. Water level indicator
5. On/off switch button with light
7. Power base with cord
2. Top lid
1. Spout
Before first use, remove possible manufacturing process residues by boiling 3
full kettles of water. Dispose this water.
Tip: You can use vinegar or special descaling agents for the first time.
Before use for the first time
4. Release the button to open the lid.
6. The jug kettle is now switched on, and the water will now begin to heat. The
jug kettle switches off automatically a few seconds after the water has come
to the boil. The on/off pilot light will now extinguish.
2. Press the button to open the lid (3).
3. Fill the jug with the required quantity of water (at least 0.5 litres, and a
maximum of 1,7 litres). Never fill the water boiler over the “max”. Otherwise
the hot water can spatter out of the base.
7. Remove the jug from the base by the handle, and pour the water out.
5. Place the jug on the base, and insert the plug in the wall socket. Push down
the on/off switch. The on/off pilot light will illuminate.
ATTENTION
Make sure that you do not spill any water on the base.
1. Turn the jug so that the spout faces away from you.
Use
11
