35
The free “Charge Master” software gives you ability to operate the charger through the
computer. You can monitor pack voltage, cell voltage and other data during the charging,
view charge date in real-time graphs. And you can initiate, control charging and update
firmware from “Charge Master”.
In order to connect the charger to the computer and use the “Charge Master”, you are
required to use a USB cable which is not included in this package. The cable must be
terminated on one end with “A” plug and the opposite end is terminated with “micro-B” plug
which can connect to charger directly.
You can check, monitor, operate and upgrade two channels with one computer.
The “Charge Master” can be download from www.pulsetec.eu
XH Adaptor (2pcs)
Charging Cable
(2pcs)
Power Cord
Charging Cable with
XT60 connector (2pcs)
SET CONTENT
Using The Charge Control Software “Charge Master”
