manualshive.com logo in svg

PulseTec Ultima 250 Duo, Инструкция по эксплуатации, Страница: 2 / 40

Поделиться
Скачать
PulseTec Ultima 250 Duo Скачать руководство пользователя страница 2

2

Introduction .......................................................................................................................3
Set Content.......................................................................................................................5
Special Features...............................................................................................................6
Warning And Safety Notes ...............................................................................................9
Program Flow Chart .......................................................................................................12
Buttons Explanation........................................................................................................13
Power and Battery Connection .......................................................................................14
Power Distribution ..........................................................................................................16
Operating Program .........................................................................................................17
Lithium Battery Program (LiPo/LiFe/LiIon/LiHV) ............................................................18
NiMH/NiCd Battery Program ..........................................................................................21
Pb Lead-acid Battery Program .......................................................................................25
DC Power Supply ...........................................................................................................27
Battery Memory Set and Call Out ...................................................................................28
System Setting ...............................................................................................................30
Battery Voltage Meter .....................................................................................................32
Battery Resistance Meter ...............................................................................................33
Warning and Error message ...........................................................................................34
Specification ...................................................................................................................35
Declaration of Conformity ...............................................................................................36
Commonly Used Terms ..................................................................................................37
Warranty Conditions & Liability Disclaimer .....................................................................38

WARNING

This charger is not intended for use by persons (including children) with reduced phys-

ical, sensory or mental capabilities, or lack of experience and knowledge, unless they 

have been given supervision or instruction concerning use of the appliance by a person 

responsible for their safety.

Children should be supervised to ensure that they do not play with the charger.

Do not recharge non-rechargeable batteries!

During charging, the battery must be placed in a well-ventilated area!

Never leave the charger unattended when charging the battery.

Table Of Contents

Содержание Ultima 250 Duo









































Отзывы:

Нет отзывов