Pulse TPA1800 Скачать руководство пользователя страница 6

• 

 Power amp output to speaker input (unshielded speaker cable). 

 
 
 
 

DO NOT 

DO NOT 

DO NOT 

DO NOT …

…    

1. 

 Prevent airflow to your amp; ventilation is required front and rear  

2. 

 ‘Daisy chain’ speakers. In STEREO mode run a maximum of 1x 2Ω speaker, 2x 4Ω 
speakers or 2x 8Ω speakers per amplifier channel. BRIDGE MONO mode run a maximum 
of 1x 4Ω speaker or 2x 8Ω speakers per amplifier channel. 

3. 

 Run amplifiers with the clip or limit lights on constantly  

4. 

 Send a clipped or overdriven signal from your mixer or source to the amp  

5. 

 Store your amp or speakers in a damp environment  

6. 

 Overload mains sockets; Never run more than 3300W of amplifiers, lights or other 
electronic equipment from one mains outlet socket. 

7. 

 Connect 2 amp channels, or 2 different amps to one speaker  

8. 

 Short circuit or cross-connect an amps inputs or outputs  

9. 

The front panel has both SIGNAL and CLIP LED indicators 

The front panel has both SIGNAL and CLIP LED indicators 

The front panel has both SIGNAL and CLIP LED indicators 

The front panel has both SIGNAL and CLIP LED indicators –––– if the CLIP L

 if the CLIP L

 if the CLIP L

 if the CLIP LED’s illuminate 

ED’s illuminate 

ED’s illuminate 

ED’s illuminate 

reduce the input signal to the amplifier immediately. A clipped signal within the audio signal 

reduce the input signal to the amplifier immediately. A clipped signal within the audio signal 

reduce the input signal to the amplifier immediately. A clipped signal within the audio signal 

reduce the input signal to the amplifier immediately. A clipped signal within the audio signal 

chain can damage both speakers and amplifiers.

chain can damage both speakers and amplifiers.

chain can damage both speakers and amplifiers.

chain can damage both speakers and amplifiers. 

 

 
IMPORTANT SAFETY INSTRUCTIONS  

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJU

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJU

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJU

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY 

RY 

RY 

RY 

TO PERSONS 

TO PERSONS 

TO PERSONS 

TO PERSONS  

WARNING - Using electric product, basic precautions should always be followed, including the 
following:  
1. Read all the SAFETY INSTRUCTIONS before using the product.  
2. To reduce the risk of injury, close supervision is necessary when the product is used near children.  
3. Do not use this product near water -for example, near a bathtub, washbowl, kitchen sink, in a wet 
basement or near a swimming pool or the like.  
4. This product is capable of producing sound levels that could cause permanent hearing loss. DO 
NOT operate for a long period of time at high volume or at a level that is uncomfortable. If you 
experience any hearing loss or ringing in the ears, you should consult an audiologist.  
5. This product should be located so that its location or position does not interfere with its proper 
ventilation.  

Содержание TPA1800









Отзывы: