Pulse PLS00571, Быстрый старт

Страница: 2 / 6

Please read these instructions carefully before use and retain for future
reference.
IMPORTANT SAFETY INFORMATION
•
When using electrical appliances basic safety precautions should always be
followed.
• Check the product before use for any damage. Should you notice any damage on
the cable or casing, do not use.
•
Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the product to the power supply.
• Keep this product away from rain and moisture.
• Caution: Never look directly into the light source.
•
Always disconnect from power when the product is not in use or before
cleaning.
• Do not operate or store in an environment of high humidity or where moisture may
enter the product as this can reduce insulation and lead to electric shock.
Safety Information for Installation and Operation
•
When installing, make sure that the product is not exposed to extreme heat,
moisture or dust.
• If you’re using a smoke machine, make sure that the product is never exposed to
the direct smoke jet and is installed at least 1.5
'
away.
•
The ambient temperature must always be between 23°F and 113°F. Keep away
from air-conditioning units and heaters.
• The relative humidity must not exceed 50% with an ambient temperature of 113°F.
• This product must only be operated in an altitude between -
65'
and
6560'
above
sea level.
•
The minimum distance between the light-output and the illuminated surface must
be more than 1.5
'
.
• This product is allowed to be installed via a mounting bracket. In order to have
sufficient ventilation, leave 20
"
of free space around the device.
•
The housing must not touch any surrounding surfaces or objects.
•
Operate the product only after having familiari
z
ed yourself with its functions. Do not
allow operation by persons unqualified.
• A secondary means of suspension must be provided, such that in the event of a
failure of the primary suspension, no part of the luminaire can fall.
•
The operator must make sure that safety related matters are observed and that
the installation is approved by a qualified installer before taking into operation for
the first time.
2