2
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
•
When using electrical appliances basic safety precautions should always be
followed.
•
Check the product before use for any damage. Should you notice any damage on
the cable or casing, do not use.
•
Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the product to the mains power supply.
•
Keep this product away from rain and moisture.
•
For indoor use only.
•
Do not block any ventilation openings.
•
Do not install near to any heat sources.
•
Always disconnect from the mains when the product is not in use or before
cleaning.
•
Do not operate or store in an environment of high humidity or where moisture may
enter the product as this can reduce insulation and lead to electric shock.
Safety Information for Installation and Operation
CAUTION
- These professional loudspeaker systems are capable of generating very
high sound pressure levels. Use care with placement and operation to avoid exposure
to excessive volume levels. Permanent hearing damage can result when operated to
extreme levels.
•
In order to avoid damage to drivers and other equipment, it is advisable to
establish and follow a routine for powering up and powering down a sound system.
•
With all system components connected, turn on source equipment (mixers, signal
processors, record and playback units, etc.) BEFORE powering up amplifiers.
Transient voltages from powering up source equipment can damage speakers if
amplifiers are already turned on.
•
Make sure that amplifier volumes are set to their minimum settings and power up
any system amplifiers LAST. It is recommended that all system components be
allowed to stabilize for several seconds before any source signals are introduced
or level setting adjustments are made.
•
Similarly, when shutting systems down, turn all amplifiers off first, before powering
down any other system components.
•
Do not use shielded or microphone cables for connection between amplifiers and
speakers. Use only approved speaker cables with proper connectors.
•
There are no user serviceable parts inside this product. Users should not attempt
to service this product.
•
Operate the product only after having familiarised yourself with its functions. Do
not allow operation by persons unqualified.
•
If rigging suspended mounting of the speaker system, a secondary means of
suspension must be provided, such that in the event of a failure of the primary
suspension, no part of the system can fall.
•
The operator must make sure that safety related matters are observed and that
the installation is approved by a qualified installer before taking into operation for
the first time.
