www.pulse-audio.co.uk
| MEGAMOUTH MK3 User Manual
Side Panel
15. MIC
6.3mm jack input for wired microphone
16. LINE OUT
6.3mm jack master line output
17. LINE IN
L+R RCA line input
18. PHONES
3.5mm headphones jack output
19. DC 12V
12Vdc power input (e.g. car battery)
Operation
The Megamouth portable PA unit may be powered from mains or the internal rechargeable battery.
Before switching on, ensure that all rotary controls are turned fully down.
To operate from mains, connect the supplied Fig.8 lead to an appropriate mains outlet.
The POWER and CHARGE LEDs (7) will indicate the mains power status.
The CHARGE indicator will light red to indicate that the battery is charging. This will change to green
when fully charged.
In order to operate from the battery, it is important to charge from the mains first.
An external 12Vdc power supply may be used, such as a car battery or mains adaptor. This should be
connected to the side-mounted DC12V 2.1mm jack (19) with centre wired to positive. Should the overall
output of the Megamouth be required to feed another active speaker or recording device, this may be
connected via the 6.3mm LINE OUT jack (16)
Switching on the POWER switch (6) will activate the Megamouth and the POWER LED will light.
Turn up TREBLE (9) and BASS (11) controls to the 12 o’clock position.
For silent practice or checking input signals, a pair of headphones may be connected to the Megamouth
via the side-mounted 3.5mm jack (18)
The Megamouth is now ready for use.
