Operation Instruction
Each channel include aseparate Limiter, it includes: threshold LEVEL (-20dB-+15dB),
attack time (1-1 OOms), Hold time (0-1 OOms), Decay time (10-1 OOOms).
H.
Name of channel: Rotate Param to change the channel name.
Op2
Name
Name: Low
I.
Input signal (Signal source selecting )
Op4
High
source
source: sum A+B
In this menu, rotate "Param" to change current channel.
Note: In output menu ( OpXX ) , push "Gain" again to change output channel
(Op1 ... Op6, Op1 ..... 0p6 )
J.
Copy function in channels
8
Copy Output Data
[ENTER] to Copy
Press "enter" to enter source output selecting:
Source Output: [ 1]
I n this menu, rota te "Param" or press PREV, NEXT to change source output.
Press "ENTER" to enter target output.
Source Output: [ 1]
Target Output: [2]
In this
menu,
rota te "Param" or press PREV, N EXT to change target output.
Press "ENTER" to confirm channel copy.
Source: 1 Target: 2
[ENTER] to Confirm
The prameters that can be copied in channels include all above parameters from
A-H points, no copy for channel sources.