Toll Free: 888.785.7320
www.PulseShowerSpas.com
Position mounting flanges and mark hole locations. Drill 1/8” pilot holes
through shower wall into wood or metal stud.
NOTE: If wall is tiled, drill through tile (only) with a 1/4” diameter masonry
or ceramic tile drill bit and then change to the 1/8” drill bit to complete.
HAND HELD HOLDER
INSTALLATION
SHOWER ARM MOUNT
INSTALLATION
Attach shower
arm mount to your
existing shower
arm using supplied
washer.
Shower arm NOT
INCLUDED.
PARTS INCLUDED
• L-type stainless steel rail
• 5 Function hand held
• 72” Shower hose
• Installation manual
• Shower arm mount with
hand held holder
Once the ErgoGrabBar is securely fastened to wall, align cover plate
locking tabs with slots in flange. Rotate TWIST-LOCK cover plate
counterclockwise approx. 1/4” turn to lock in place.
STEP 1
STEP 2
STEP 3
INSTALLATION
A
B
C
PRODUCT DIMENSIONS
DETAIL MOUNTING INSTALLATION
Install mounting screws through grab bar mounting bracket and directly
into wood/metal stud or bracing. Use masonry anchors if necessary.
