PSA300 Hardware Guide
© 2020 Pulse Secure, LLC. All rights reserved
12
Power on the PSA300
1.
Get the power supply:
2.
Connect it to the PSA300 and a power source:
3.
The appliance will power-on automatically:
Configure Basic Settings
When you boot an unconfigured PSA300, you need to enter basic network and machine information through
the console to make it accessible to the network. Based on your selection of personality, a different binary
will boot up in the system. After entering these settings, you can continue configuring the PSA300 through
the administrator Web console.
During this basic setup process, you define the
“personality”
of the PSA300. For example, you can set up the
PSA300 to act as a Pulse Connect Secure or Pulse Policy Secure device. You can switch personalities at any
time by reconfiguring the PSA300.
The installation process may take up to 20 minutes.
Do this to perform basic setup:
1.
Enter the number corresponding to the personality for which you want to configure the PSA300.
