4
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
MATERIAL.
TITLE.
DWG NO.
REV.
SHEET 1 OF 1
SCALE: 1:10
DO NOT SCALE DRAWING
1. DIMENSIONS APPLY BEFORE PLATING OR COATING.
2. REMOVE ALL BURRS, BREAK SHARP EDGES.
3. ALL APPLICABLE BRAVO STANDARDS AND
SPECIFICATIONS APPLY.
UNLESS OTHERWISE SPECIFIED:
METRIC
THIRD ANGLE PROJECTION
1
0.5
0.25
0.1
1°
X.
X.X
X.XX
X.XXX
ANGULAR
C
SIZE
FINISH.
This document is the property of Bravo. All rights are reserved, including copyrights.
TOLERANCES.
DATE
2010-9-1
DRAWN
Sky Shi
APPR
METRIC_C
COLOR.
BRAVO SPORTS
12801 CARMENITA ROAD
SANTA FE SPRINGS, CA, 90670
USA
SHANGHAI OFFICE:
RM 1501/1508, ORIENT CENTER
699 NANJING ROAD WEST
SHANGHAI, CHINA, 200041
Required Tools
10mm wrench
(included)
5mm hex wrench
(included)
Before You Start
WARNING:
This scooter must be assembled by an adult! Remove all packing and items from the display box.
• Allow up to 20 minutes for assembly, not including initial charge time.
• Allow up to 10 hours for the initial charge (see page 6 for charging information).
Estimated Assembly Time
WARNING:
DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ WITH YOUR PULSE
PERFORMANCE PRODUCTS™ ELECTRIC SCOOTER. This scooter has been built to specific Pulse
Performance Products™ design specifications and should not be modified. Altering of the original components
may or may not be compatible with the design and will void the warranty.
battery charger
(included)
charging
port
Go Button
