7
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
bolts for proper tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play,
this is an indication of excess wear and replacement is necessary. Replace immediately with only genuine Pulse Performance
Products™ wheels. Worn wheels and bearings are considered normal wear-and-tear and are not covered by the Pulse
Performance Products™ warranty. Wheels other than genuine Pulse Performance Products™ wheels may not be compatible
with your Pulse Performance Products™ scooter. The use of anything other than genuine Pulse Performance Products™
replacement parts may affect your safety and will void your warranty.
Cleaning Your Scooter
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the surfaces.
Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic components or
soften the decals or decal adhesive.
How to Ride
To go:
Place one foot onto the deck, push forward with the other foot.
To turn:
Steer with both hands on the handlebar to turn. For enhanced cornering, lean slightly into the direction of the turn.
To stop:
For controlled stops, apply the brake by stepping on the rear fender brake. Pulse Performance Products™
recommends that you practice applying the brake at various speeds and in an open area free from obstructions before riding
your Pulse Performance Products™ scooter around people and obstacles.
WARNING:
Wheelies and other stunt-type riding reduces your ability to maneuver and control your scooter. Take the necessary
precautions such as wearing appropriate protective gear and practice in an area safe for riding that is free from obstructions.
Loose Parts
Check and secure all fasteners before every ride. Make sure the stem tube clamp is tightened properly before riding.
Replacement Parts
For a complete selection of parts visit our website at www.pulsescooters.com. Replace all worn or broken parts immediately.
Safety Gear
Always wear proper protective equipment such as an approved safety helmet. Elbow and kneepads are also recommended.
Always wear shoes (lace up shoes with rubber soles), never ride barefoot or in sandals and keep shoelaces tied and out of the
way of the wheels.
Ride Carefully
Avoid steep inclines and don’t ride too fast, you can lose control and fall. Skateboard parks are not designed for scooters.
Never ride in traffic or on the street and watch your surroundings for pedestrians, bicyclists, boarders and skaters. Maintain a
hold onto the handlebars at all times.
DO NOT RETURN TO STORE
Failure to follow these instructions may damage your scooter and void your warranty.
Safety Tips
