manualshive.com logo in svg

Pulse fitness 280G-B, Руководство по сборке, эксплуатации и запасным частям

Поделиться
Скачать
Pulse fitness 280G-B Скачать руководство пользователя страница 43

       Assembly, Operation & Parts Manual                   G-Range                         CV                              Pg

43

 

Important Safety Instructions 

(Continued)

8.6 How to Stabilise the PULSE FITNESS X-Train Elliptical Cross-Trainer

Follow all safety instructions.  Move the Elliptical Cross-Trainer to the location in which it will be used.

8.7 Install External Power Supply - Series 3 Consoles Only (Cirrus)

Series 3 Consoles are powered by an external AC 12-Volt power supply.  Plug in the power to the external power connector on the front 
end of the Elliptical Cross-Trainer and then plug the cord into an AC outlet.  The Console should begin its boot-up cycle.  The Series 3 
Consoles will show a message indicating it is initialising (which takes approximately 2 minutes).

Note:

 If any of the Consoles do not light up, contact PULSE FITNESS' Global Service Team (refer to page 02 of this manual).  Use only 

the power supply provided by PULSE FITNESS in order to ensure against unsafe operation.

8.8 Install Coaxial & Ethernet Cables (if necessary) - Series 2 & Series 3 Only

The following connection receptacles are located at the front of the 280G-B / 280G-F X-Train Elliptical Cross-Trainer:
Coaxial Cable, and Ethernet Cable.

CAUTION:

 Connectors should easily fit into the receptacles.  Forcing a connection may lead to damage to the barrel connector and/or 

receptacle and may void product warranty. 

Содержание 280G-B



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды