Pulse fitness 224B-AAB, Руководство пользователя

Страница: 6 / 16

6
Step three
Attach the saddle (1) onto seat slider
(42), and secure the saddle by tightening
the nuts on both sides of the saddle
clamp on the underside of the saddle,
use wrench.
Slide the seat slider (42) into the seat
post (43) adjust to desired position and
secure with the release lever (6) on the
bottom of the seat post (43).
Slide the seat slider (42) into the seat
post (43) adjust to desired position and
secure with the release lever (6) on the
bottom of the seat post (43).
Step four
Attach the pedals (11) into the crank
arms (20)(21), each pedal is marked with
L (left) or R (right) to denote the side of
the spinning bike they are on.
Note
– Make sure the crank arm is
installed on the correct side. Be
careful to align the threads correctly
to avoid damaging them.
Tighten using
a 15mm spanner; both pedals should
tighten towards the front of the spinning
bike.