COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means (electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise) without express
written permission and consent from Pulse-Eight Limited.
© Copyright 2019 Pulse-Eight Limited. All Rights Reserved.
Version 1.0 - August 2019
Pulse-Eight Limited
8-12 Alder Hills . Poole . Dorset . BH12 4AL . UK
[email protected] | +44 (0)1202 413610
www.pulse-eight.com
INITIAL SETUP
1
CONNECT INPUT DEVICE
Using the ‘HDMI Input’ port, connect to the source device
(i.e Blu-Ray player) using a HDMI cable (not supplied).
2
CONNECT OUTPUT DEVICES
Using the ‘HDMI Output’ port, connect your sink device (i.e
TV) using a HDMI cable (not supplied).
3
MOVE THE SCALER
If you are sending a 4K Picture from your source device to
a 1080p Sink device (i.e not 4K) slide the Video slider to
‘Downscale’. This also works in reverse if you are sending a
picture from your 1080p source to a 4K Sink, you can slide
it to ‘Upscale’ (please note in order to get a 4K picture you
will need a HDMI cable 2.0, cables not included).
4
STEREO OUT
The HDMI will carry the audio signal, however the HDMI
DAC comes with the option to output sound to a Soundbar
or another audio output should you wish to route your
Audio direct from the DAC rather than the display to the
DAC (cables not included)
5
CONNECT POWER
Use the supplied power supply and connect to DC 5V port.
PLEASE NOTE: HDMI DAC does not support downscaling for Sky Q 2TB
or Virgin V6 4K content - please use the HDMI UHD 18Gbps Downscaler
(P8-HDMI2-4KDS)
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio and the double-D
symbol are trademarks of Dolby Laboratories.
