The 4K Downscaler downscales video from 4K to 1080p. It can be
used with a video matrix or splitter where there are 4K sources and
a mix of 4K and 1080p TVs.
HDMI UHD 18GBPS DOWNSCALER
P8-HDMI2-4KDS
INSTALLATION
1
Connect a HDMI cable between Downscaler “HDMI OUT” and TV.
2
Connect a HDMI cable between Downscaler “HDMI IN” and Video
Source.
3
For S/PDIF audio output, connect an Optical cable between the
“Optical Out” port and Audio device.*
4
Plug in power jack to “DC 5V” port.
5
Power on power adapter.
* Optical Audio will not output if audio has more than 6 channels.
STATUS LED INDICATOR
Red
Powering on. This may take a few seconds.
Yellow
Detected a change in the video signal and configuring
Green
Configured and healthy. Video and audio will be output.
EDID CONTROL
The rotating switch controls the functionality of the Downscaler.
To set a particular mode:
1
Power OFF the Downscaler.
2
Using a small flat head screwdriver, turn the arrow to the
desired mode number.
3
Power ON the Downscaler.
0
Use saved EDID after copying from a TV using mode 1
1
Copy EDID from a TV and save it. Switch to 0 after saving EDID
2
Use EDID profile 4K, HDR, 8 Channel Audio
3
Use EDID profile 4K, HDR, 6 Channel Audio
4
Use EDID profile 4K, HDR, 2 Channel Audio
5
Use EDID profile 4K, No HDR, 8 Channel Audio
6
Use EDID profile 4K, No HDR, 6 Channel Audio
7
Use EDID profile 4K, No HDR, 2 Channel Audio
8-F
Reserved. No function.
* Optical Audio will not output if audio has more than 6 channels.
TECHNICAL
A
Selector Wheel
B
HDMI In
C
5V Power
D
Optical Out
E
HDMI Out
F
LED Indicator
A
F
B
E
C
D
