9. Memory Function
(Model Specific)
GM3+ monitor has a memory capacity to automatically store your last 75 Blood
Glucose test results along with smart tags. You can review these readings in order from
the most recent reading to the oldest reading or vice versa. The Smart-tag, Date and
Time of the test result is also displayed enabling you to know when those readings were
taken. GM3+ also displays the average of the all Random values saved , followed by the
Before Meal Average and After Meal average of the values saved in its memory. While
calculating the average, it ignores all results under 20 mg/dl and above 600mg/dl.
ê
Your monitor has been programmed to retain the memory readings when you replace batteries
or store it without external batteries for a period of time.
ê
If the memory is full with 75 glucose results and a new result is added, then, the oldest result is
automatically deleted.
Reviewing Average of Stored Values
1) Press the POWER Button once to begin using the
memory function.
2) The monitor shows your average readings with Smart-tags.
3) Press the NEXT or PREV Button to review other averages
sequentially.
Reviewing Stored Values
1) Press the POWER Button till the ‘MEM’ symbol is
displayed on the monitor to begin using the memory function.
2) The monitor shows your latest reading with Smart-tag.
3) Press the NEXT or PREV Button to review other averages
sequentially.
4) Continue to press NEXT or PREV Button continuously to
scroll through all memory values with their Smart-tags.
ê
If there is no Button input for 6 seconds, the program automatically exits the memory mode and
returns to test mode.
10. Important Do’s & Don't’s
1) Check Expiry Date: Use strips before the expiry date marked on the GM3+ test strip pack.
o
2)
Store Strips as recommended Store the strips in a cool and dry place below 30 C. Packed strips may be stored in
refrigerator. DO NOT use strips which have not been correctly stored.
3)
DO NOT use strips, that have been left open for a long time. Tear open the foil pack and remove the strip at the
time of testing only.
4)
Ensure that the code displayed on the monitor matches the code printed on the strips pack.
5)
Ensure that your hands are clean at the time of obtaining a sample.
