Available Mounting Options
Direct Straight/Angle Mount (with or without extension tube) is
always preferable. However, for applications not allowing any
direct mounts or extension mounts, remotely mount the unit
using a 6mm O.D. (1/4") pre-filled lube line.
WARNING
Keep the maximum distance per lube point at 6m (20ft) or less.
Single Point Lubrication
Multi Point Lubrication Using Progressive Divider Block
Installation parts for Multi Point Lubrication
Mounting Bracket Assembly
Extension Tube
Progressive Divider Block
Remote multi point lubrication is available with the Pulsarlube M using
a divider block. It is recommended to test the back pressure of the bearing,
lube lines, and divider block after assembly using a grease gun connected to
a pressure gauge. Ensure the break-off pressure is below the average operating
pressure of 30kgf/
㎠
(425psi).
High Performance Automatic Grease Lubricator
PULSARLUBE M 125/250cc Grease Lubricator
Models
Specifications
Grease Pouch
Installation Thread Size
Available Dispensing Periods
Multi Point
Weight
Product Size
Remote Installation
125 / 250cc (replaceable)
-15˚C ~ 60˚C (5˚F ~ 140˚F)
-40˚C ~ 60˚C (-40˚F ~ 140˚F) *
30~60kgf/
㎠
(425~850psi)
3/8" Male BSPT
Up to 8 points
Half (H), 1, 2, 3, 6 & 12 months
125cc: Ø91mm (3.6") × 183mm (7.2")
125cc: 860g (1.89 lb)
250cc: 1,050g (2.31 lb)
250cc: Ø91mm (3.6") × 210mm (8.2")
Up to 6m (20ft) using a 6mm (1/4") O.D.
pre-filled lube line
Operating Pressure
Operating Temperature
Specifications
Description
Product Details
How to Order
Technical information is subject to change without notice.
Before Use
Shelf Life and Product Warranty
KLT125 / PL1
KLT250 / PL1
Pulsarlube Model #
(KLT125: 125cc, KLT250: 250cc)
Grease Type
Pulsarlube USA, Inc.
4312 Di Paolo Center, Glenview, IL 60025, USA
www.pulsarlube.com / [email protected]
Doc No. 1042-000 REV. 120600
TEL: 1-847-795-0591 FAX: 1-847-795-0119
The shelf life of each Pulsarlube M unit is 1 year from the date of production.
Product warranty is limited to original defects in material and workmanship
and will not cover any collateral damage due to mishandling, abuse and /or any
other inappropriate use of this product. Warranty period is 1 year from the date
of purchase.
/
Deactivate "Automatic Lock Out"by
pressing the MODE/LOCK button
until the lock icon ( ) disappears
125 / 250
Thank you for purchasing the Pulsarlube M, the electromechanical automatic grease lubricator from Pulsarlube USA, Inc.
To ensure the safe operation and proper installation of the Pulsarlube M unit, we strongly recommend that you read the
following information carefully before use.
If you require further information, please contact your local supplier or manufacturer.
* with optional Lithium Battery Pack
The dispensing period setting
The # of days remaining until the end
of lube cycle
The unit is in"Automatic Lock Out"
mode
Selected grease pouch capacity
The test mode is activated
Select the dispensing rate in
ascending order: 1▶2 ▶ 3 ▶ 6 ▶
12 ▶ Half (H)
Press the POWER button for 2
seconds to turn unit on or off
Select the volume of grease pouch
Run a test cycle by pressing the
TEST button for two seconds
Reset the unit when the unit
malfunctions and/or after changing
the service pack
The # of days after dispensing has
completed
The # of days on stand-by mode
due to excessive backpressure
Low battery power
Excessive backpressure exists
Empty grease level
Signal lamp blinks periodically
when battery power is low, excessive
backpressure exists, or if grease
level is empty
250
125
OIL
Buttons
LCD Display - Function
Pouch
Spring
Pouch
Plate
Grease
Pouch
Motor
Gear
Set
Worm
Gear
Connecting Thread
3/8"BSPT
Piston
LCD
Main Body
Housing
Push-in One-touch
Fitting
Empty & Pre-filled Nylon
Tubing
