Mounting Methods
Rev.00
The Pulsarlube EX is tested and certified by UL (USA), ATEX (Europe), and KCs (Korea).
Explosion Hazard - Do not remove or replace batteries unless power has been
disconnected or the area is known to be free of ignitable concentrations of
flammable gases or vapors.
▶
Replace Battery With Pulsarlube EX’s battery pack only. Use of Another Battery May Present A
risk of Fire or Explosion. See Owner’s Manual For Safety Instructions.
Warning
Shelf life and Warranty Product
Warranty is limited to original defects in material and
workmanship and will not cover any collateral damage due to mishandling, abuse and /or any
other inappropriate use of this product. Warranty period is 1 year from the date of purchase.
(125& 250ml)
Series
User Manual
Shelf life and Warranty
LCD Functions
Selecting the dispensing period
Reset the unit when the unit
malfunctions and/or after changing
the Service Pack
Power
ON/OFF
Press the button for 2 seconds
to turn unit
on
of
off
.
Deactivate 'Automatic Lock Out'
mode by pressing the button for
2~3 seconds
LCD Displays
The dispensing period setting
The unit is in
"Automatic Lock Out" mode
Excessive backpressure exists
Selected grease pouch capacity
Empty grease level
MONTH
The # of days remaining until the
end of lube cycle
Low battery power
The test mode is activated
Signal lamp blinks periodically
when battery power is low,
excessive backpressure exists,
or if grease level is empty
/
The # of days after dispensing
has completed
The of days after the unit
has stopped dispensing due to
excessive backpressure
A)
To select grease capacity
A short press of the button to
select 125ml or 250ml capacity
B)
To run a test cycle
Hold the button for 2 seconds
Pulsarlube U.S.A
TEL:1-847-593-5300 FAX:1-847-593-5303 www.pulsarlube.com / [email protected]
1480 Howard Street, Elk Grove Village, IL 60007, USA
Single Point Installation
Direct Mount or Remote Installation using
Extension Tube
Direct mount is always preferable.
For applications not allowing any direct
mounts, remotely mount the unit using
appropriate accessories and keep the distance
from the lube point as short as possible.
For remote installation using a tube, use a
6mm O.D. (1/4") tubing pre-filled with the same
or compatible grease as the grease contained
in the unit.
Reference Designation Description Type of Protection
M1
SW4
Motor
Reed Switch
Non-incendive Circuit
Non-incendive Circuit
This equipment is suitable for use in Class I, Division 2, Group C and D hazardous
locations.
( SUBSTITUTION OF MOTOR AND REED SWITCH MAY IMPAIR SUITABILITY FOR
DIVISION 2 )
User Manual