RSUPS54R
RACK POWER
5
Fig.4. The view of the switch.
Table 2. (See Fig. 3).
Element no.
[Fig. 4]
Description
LINK
- yellow LED - indicating the LAN connection status
PoE
- green LED indicating voltage at the PoE port
PWR
– green LED indicating the supply voltage of the Switch
UPLINK
port for recorder (data)
PoE
port
1÷4
for cameras IP connection (data + power supply)
1.4. Specifications.
- parameters of the switch (tab.3)
- electrical parameters (tab.4)
- mechanical parameters (tab.5)
- operation safety (tab.6)
- operating parameters (tab.7)
Parameters of the switch (tab. 3).
Ports
5 10/100Mb/s ports (4 x PoE + 1 x UPLINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af (1
÷4 ports), 48VDC / 15,4W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Forwarding rate
10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port
Bandwidth
1,6Gbps
Transmission
method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
*
The given value of 15,4W per port is the maximum value. The total power consumption should not exceed 48W when all PoE ports are
being used.
Electrical parameters (tab. 4).
Mains supply
176÷264V AC
Current up to
1,1A@230V AC max.
Supply power
122W max.
Output voltage at the PoE ports
Output voltage the recorder
– NVR
48V DC
– maintained regardless of the state of battery charge
12V DC
– maintained regardless of the state of battery charge
The output current at the PoE ports
4 x 0,3A Ʃ=1A (max.)
Output current of the recorder
– NVR
5A
Ripple voltage
– output of the NVR recorder
150 mV p-p max.
Battery charge current
0,5A max. (+/-5%)
Short-circuit protection SCP and overload
protection OLP
105% ÷ 150% of the PSU power, manual restart (failure
requires the disconnection of the DC output)
Battery circuit protection SCP and reverse
polarity connection
melting fuse
PSU current consumption
0,2A
Excessive discharge protection UVP
U<19V (+/-5%)
– disconnect of connection battery
Optical indication of operation:
LED: AC, DC, NVR, TEMP, LoB, ALARM, LINK, PoE
Acoustic operation indication:
Piezoelectric indicator ~75dB/0,3m
The ALARM technical output of collective failure
Relay type: 1A@ 30VDC/50VAC
The
F
MAINS
fuse in the 230V power supply circuit
T 3,15A