17
OPERATION
4. Once the engine is running, put the starter rope
Into the rope guide. As shown in Fig 17
Stopping The Engine
As shown in Fig 18
Release the engine start/stop lever, it will return to its
Initial position, the engine will automatically switches off.
To Clean A Flooded Engine
1. Release the engine start/stop lever to stop engine.
2. Remove the spark plug, dry it, and then reinstall it.
3. Pull the engine start/stop lever toward upper handle.
4. Operate the pull start as described above.
Using The Self-Propelled Function
As shown in Fig 19
This unit equipped with self-propelled system. If you press the drive lever
(clutch lever), the clutch for the drive will be closed and the lawnmower
will start to move with the engine running.
To stop the moving lawnmower, just simply release the drive lever in good time .
If the engine won’t start after you have
pulled the starter several times, the
NOTE!
Fig 17
Fig 18
engine may be flood with excess fuel. Use following procedure
to clear and start a flooded engine.
Install the spark plug carefully by hand,
to avoid cross-threading. After the plug is
NOTE!
seated tighten 1/8 to 1/4 turn with socket spanner of spark
plug to compress the washer.
Fig 19
