www.pulsar.pl PSZKT5A
2
Features:
DC 13,8V uninterruptible power supply
75W power supply for ZKT access control cards
fitting battery: 7Ah/12V
wide range
of mains supply: 176÷264V
high efficiency
battery charging and maintenance control
excessive discharging (UVP) protection
battery charge current 0,5A
battery output full protection against short-circuit
and reverse polarity connection
LED indication
protections:
SCP short-circuit protection
OVP overvoltage protection
overvoltage protection (input AC)
against sabotage
overload protection (OLP)
warranty – 2 year from the production date
CONTENTS:
1. Technical description.
1.1 General description
1.2 Block diagram
1.3 Description of elements and connectors of the PSU
1.4 Specifications
2. Installation.
2.1 Requirements
2.2 Installation procedure
3. Operating status indication.
3.1 LED indication of operating status
4. Operation and use.
4.1 Overload or short circuit of the PSU output (SCP on)
4.2 Disconnection of discharged battery
4.3 Maintenance
1. Technical description.
1.1 General description.
A buffer PSU intended for uninterrupted supply to devices that require stabilised voltage of
12V DC (+/-15%).
The PSU provides voltage of
U=13,8V DC
with output current of
I=4,5A
+ 0,5A for battery charging
*
.
In case of power
decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high
energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9005) which can accommodate a 7Ah/12V
battery. A micro switch indicates door opening (front cover).
During normal operation, the total current drawn by the equipment may not exceed I = 4,5A
*
.
Maximum battery charging current: 0,5A
*
.
Total device c battery: 5A max
*
.
The power supply unit is compatible with the following controllers:
-
ZKT
ECO
, inBio series: inBio160, inBio260, inBio460
- ZKT
ECO
, C3-series: C3-100, C3-200, C3-400
*
Refer to chart 1
