www.pulsar.pl
PSUPS20A12CR
4
1.3. Description of PSU components.
Table 1. Description of components and connectors module LB8
Component no.
[Fig. 2]
Description
F1
÷F8
glass fuses
L1
÷L8
LED voltage indication at the outputs
AUX1 ÷ AUX8
independently protected outputs
IN1-, IN2-
power supply inputs of the fuse module
Table 2. Description of components and connectors
Component no.
[Fig. 3]
Description
F
AUX
glass fuses
protection connector
AUX
– output
IN
–
power supply inputs, output filter
The enclosure contains 2 fuse modules for powering 16 cameras.
Fig.2. The view of the fuse module LB8.
Fig.3. Output filter.
Table 3. Description of
the module’s components and connectors.
Component no.
[Fig. 4]
Description
PSU module PSB-30012200
Connectors of the PSU:
L-N
230 V power connector, protection connector
V+, V-
DC supply outputs
B+, B-
battery output
green LED
indicates DC power
P1 potentiometer,
output voltage adjustment
Battery outputs: red: +, black: -
TAMPER,
contact of tamper protection
(NC)
Battery charging current selection:
Description:
jumper on,
jumper off
Fuse module LB8
DC/DC 50SE-SEP converter
Output filter
Cable for supplying recorder there is plug DC 2,1/5,5
