www.pulsar.pl
PSBEN2012B
BLACK POWER
15
-
press „<” or „>” button to set the „FLc” parameter on the display „FLc”
-
press „OK” button
- the number 1, indicating the number of failure in the memory (the highest priority),
will be displayed. Then, after one second, failure code will be automatically displayed
-
press „OK” button
- the number 2, denoting the next number of failure in the memory, will be displayed.
Then, after one second, the next failure code will be automatically displayed.
- if the memory has more failures, pressing the "OK" button will result in displaying
subsequent codes
-
the „- - -„ parameter on the display marks the end of the list of failures
5.2.5
List of failure codes and information messages.
The PSU indicates the operation status with the appropriate code. The codes are divided into two
groups,
marked with the initial letters "F" or "
I”.
The codes beginning with the letter "F" indicate a failure. The codes that begin with the letter "I" indicate the
correct operation of the PSU or repaired fault, involving, for example, fuse replacement: "I03 - BAT fuse
replaced”.
