Pulsar NoisePen Dosemeter User Manual
Page
17
Setting Scheduled Measurements
Scheduled measurements can be created to delay a single measurement or create a
repeat measurement to start at the same time for selected days over the next seven
days.
Up to 12 schedules can be set up to 28 days into the future.
To set schedules, connect the NoisePen to AnalyzerPlus, when the instrument window
appears in the bottom left, select ‘Configure’. Select the Controls tab and select
‘Enable Schedules’ and ‘New Schedule’. Configure the schedules as desired and
select ‘Save to Instrument’.
Remove the USB and the NoisePen will start measuring at the scheduled time.
Schedules can be disabled, enabled and cleared in the same window.
Windshield
The windshield WP26 provides a degree of dust protection for dusty work environments,
wind noise reduction and a degree of noise reduction in the event of the microphone
being knocked.
The windshield is simply fitted to the microphone by pushing over the top of the
microphone when not making a recording. No correction is required to acoustic results
for the windshield.
